decorative look. The LED strip, ribbon, tape, rope or string as well as LED modules can be used for decorative, edge, cabinet, shelf, main or task lighting. OurLED strip lights run at 12V and are available in various sizes and colours. Themain LED strip types are the following: 

The 3528 SMD power LED strip lights are perfect for decorativelighting, shaping any moulds or figures in any sizes, edge lighting, cabinet orshelf lighting or use it even in kitchens, bathrooms or in gardens excellentfor both indoor and outdoor use. Choose from seven different colours of LED striplights.

With our 5050 SMD LED strip lights you can create bright locallighting like  cabinet lighting to illuminate worktops, shop windows,cabinets, etc. This is our brighter version of LED strip, due to the biggersize of the LEDs included. It is also available in colour-changing, RGBversion, which can emit seven different colours and bright white light. Thestrip light can be set on one single colour or can be set to colour-changingmode with the 8 colours switching one after the other. The colours of the RGB strip can be checked on theproduct site, in the small picture underneath the larger one. 

Our indoor strip lights have anIP55 rating, which means it is splash proof, therefore the LEDs are still coveredwith silicone, though they are not suitable for outdoor use in the rain orunder water. Splash proof strips are ideal for dry or even humid places wherethey do not have a direct contact with water. Indoor LED tapes come with asticky back, so they are very easy to install.

Outdoor strip lights are waterproof and have IP68 rating. These lights canbe placed under water; though connections should always be above water or coveredwith waterproof cases. These strip lights can be fixed either with cableclips or with silicone used in kitchens and bathrooms. Four cable clips areprovided for free with every metre of the waterproof strip light.

All our strip light are flexible to one dimension, so do not twist them,because that may ruin the wires inside. Also, for 90° turn, you need to cut thetape and solder them with wires.

All our LED strip lights have a wide, 120 degree beam angle, allowing it toilluminate rather large areas even from a short distance. This makes the LEDstrip lights suitable for illuminating shelves and staircases (running alongthe stairs), desks or worktops in your kitchen or office. LED strip lights -even though they are flexible - are perfect replacements of fluorescent tubes,or other forms of strips / ropes / tapes / ribbons. 

All our LED single colour strip lights are dimmable, but only withdimmers manufactured specifically for this purpose. Check out our range ofdimmers among the accessories. Wall mounted, remote controlled andsimple turn with a knob dimmers are available.

LED strip lights are manufactured in 5 metre rolls, and they are available either by the metre - waterproof outdoor lights, or by rolls - indoor lights. The strip lights can be cut into smaller pieces - usually after every three LED units - and create smaller, 10 cm long pieces. Individual pieces of strip light can be connected by soldering wire on them. Single coloured LED strip lights require 2 core wires for the two polarities, while RGB or colour changing strip lights require 4 core wires for connecting - one for each colour (red, green, blue) and a fourth for positive polarity. For cutting and connecting the strips check the installation manuals for each product individually. 

LED strip lights can be operated with suitable 12V DC LED transformers, which are specifically created to feed LED lights. Please note: Electronic transformers are not suitable for LED lighting,we strongly recommend using our water proof LED power supplies. The LED strip light can also be operated with 12V batteries, but if you have an unregulated battery we suggest the use of a converter . The strip lights also have a voltage tolerance of 10-15V but for only short periods of time. 

Flexible LED strip lights are flexible only to one dimensions, so do nottwist them or turn them to the side, as that may break the wiresinside! 

Our product names are constructed the following way: