Skip to main content

LED RGB Amplifier, 144 W max, 12V DC, 4 A / channel, for RGB LED

£16.64

Description: The RGB signal amplifier is used to increase load capability for the wireless RGB Controller.

An RGB LED signal amplifier is necessary for every additional 20 metres of RGB LED strip lighting powered by additional 12V DC power supply (not included) if you need to operate long or multiple lengths of colour changing RGB LED strip and want to use just one remote controller to synchronise the effects. One controller will be needed in any case to create the effects and colours of the RGB LED strip and then the amplifier will work as a slave to this controller.

The amplifier is required to be connected to the controller, utilising the RGB and positive cables, these will carry the signal commands as an input to the amplifier. Connect input and output signal wires in order to ensure short circuit can not occur between wires, and then connect power to RGB amplifier, and RGB amplifier goes hand in hand with LED controller. LED power supplies .

Installation manual

 

Only 3 left in stock

Product Description

Voltage: DC 12V or 24V
Dimensions: L115 W64 H24 mm
Weight: 110g
Output currant: max. 4A each colour
Working temperature: -20°C to 60ºC

Additional Information

Weight 130.0000 lbs

Reviews

There are no reviews yet.

Be the first to review “LED RGB Amplifier, 144 W max, 12V DC, 4 A / channel, for RGB LED”

Shopping Cart